Sandvik cone crushers are of advanced design with a small footprint and high capacity in relation to size. They have high reduction efficiency and give very good product shape. With hydraulically adjusted CSS, the option of automation, a choice of several different crushing chambers, and many other high-performance features, each model is versatile, user-friendly and highly productive. The Sandvik CS- and CH-series of cone crushers have a wide field of use as they can easily be matched to changes in production through the proper selection of crushing chamber and eccentric throw.
We can supply all sandvik cone crusher parts and wear parts.
Please view the parts table and send email.
| Parts name | Material | Parts name | Material | Parts name | Material | Parts name | Material |
| Shim*4 | S235JR | Boss | 2132-01 | hub | G28Mn6+n | Ring | 2134-01 |
| Sleeve | E335 | Bottom shell bushing | JM 14-15 | Eccentric | K8 | Seal ring inner | Sis 168501/1210 |
| Washer | S355N | Foot | GS200+N | Ring | S355N | Locating bar | 5640-15 |
| Dowel pin | C45E | Liner narrow arm | Slitskydd 2183-02 | Key | SIS 212190 | Gasket | Betaflex 72 |
| Spider bushing | EN-GJL-350 | Eccentric wearing plate | CC495K(SS 5640-15) | Eccentric bushing | JM14-15 | Shim | 5150-02 |
| Seal ring | Nitrilgummi 60°SH | Bracket | S355N | Eccentric bushing | JM14-15 | Dust collar inner | EN-GJS-500-7 |
| Support ring | S355JR | Foot | GS200+N | Eccentric bushing | JM14-15 | ||
| Arm shield | S235JR(M1) | Foot | GS200+N | Gear and Pinion set | 20CrMnTiH | Parts name | Material |
| Concave ring EC | Mn18Cr2 | Liner pinionshaft arm | Mn13Cr2 | Gear and Pinion set | 20CrMnTiH | Hydroset cylinder | G28Mn6+N |
| Concave ring C | Mn18Cr2 | Bottomshell | GS200+N | Hydroset cylinder bushing | EN-GJS-700-2 | ||
| Concave ring MC | Mn18Cr2 | Bottomshell | GS200+N | Parts name | Material | Packing clamp plate | S355N |
| Concave ring | Mn18Cr2 | Inner head nut | 42CrMo4 | Piston wearing plate | Pb10Sn10 | ||
| Concave ring MF | Mn18Cr2 | Parts name | Material | Mainshaft sleeve | R1 | Step washer | 34CrNiMo6 |
| Concave ring F | Mn18Cr2 | Pipe | S235JR | Retaining ring | EN-JL1040 | Mainshaft step | CC495K(SS5640-03) |
| Filler ring MF,F | GS200+N (1306-2) | Pinion shaft housing | EN-JL1040 | Dust seal ring | Plastlaminat SIS | Piston | EN-GJL-250 |
| Filler ring MF,F | GS200+N (1306-2) | Bearing cover | EN-GJL-200 | Retainer | 1142-32 | Chevron packing | |
| Washer | S355JR | Bearing cover | EN-GJS-500-7 | Scraper | 819.0100 | Plug | S355JR |
| Hose | SS248225 | Spacer | OVAKO 280 | Mantle A | Mn18Cr2 | Hydroset cylinder cover | S355N |
| Concave ring CX | Mn18Cr2 | Pinoin shaft | C45E | Mantle B | Mn18Cr2 | ||
| Mantle EF | Mn18Cr2 | Gasket | velumoid | Mantle D | Mn18Cr2 | ||
| Concave ring EF | Mn18Cr2 | Gasket | velumoid | Mantle HC | Mn18Cr2 | ||
| Wear plate | HB360-440 | Oil level plug | S355JR | Burning ring | 1312-00 | ||
| Concave EF | Mn18Cr2 | Gasket | velumoid | Mantle EF | Mn18Cr2 | ||
| Topshell | GS200+N (1306-2) | Concave EF | Mn18Cr2 | ||||
| Topshell | K9 | Mainshaft | 1650-01 | ||||
| Mainshaft | E335 | ||||||
| Retaining ring | EN-GJL-250 | ||||||
| Head center | G28Mn6+N |